Headphone Mixer Multiple Inputs

Posted on  by 



A headphone mix (also known as the headphone monitor mix) is called upon when you’re recording a new track in the studio, to allow the recording musician to play along with the other instruments or vocalists that are being recorded at the same time (or to play along with the tracks that have already been recorded).

  1. Headphone Jack To Audio Input
  2. Headphone Mixer Software
  3. Headphone Mixer Multiple Inputs Functions
  4. Headphone Input Not Working

This mix is important as it can influence the quality of the performance and the recording.

Jam Hub is your saviour!It's an all in one piece of gear with inputs,mixer and headphone facility to do exactly what you need.With a different mix for each member, if needed. Feeding an un-amplified line level signal to a headphone amp will general result in better sound quality. These kinds of headphone amps take line level signal from your audio interface via TRS, XLR, or RCA cables, amplifies it, and distributes it to a single or multiple headphone outputs. The headphone input, as with all serious headphone amps, is 1/4 inch. The inputs on the back are stereo RCA jacks which are readily available at almost any shopping center or online. There are now RCA outputs with inline preamps so you can even power your speakers off of it too.

Headphone Mix for Recording

The monitor mix lets the musician direct and control the tracks they would like to hear in their headphones during recording. So a vocalist might like to hear more of the kick and bass when they’re recording, but when a guitarist records, he may prefer to hear more of the other guitars.

To set up a headphone mix you’ll need a studio headphone amp, and the amp you use will determine how much control you have over your mix.

If you’re using an audio interface with only 2 outputs, then you’re limited in what you can do. The best small headphone amp for a home studio is the PreSonus HP4, giving you 4 headphone outputs. A typical layout would be like this:

You only have one stereo output feeding all four headphones, so the headphone mix would be the same as the main stereo mix in your DAW and it would also be the same for all four recording musicians. This kind of arrangement is usually fine for a home studio.

Headphone Jack To Audio Input

For more headphone outputs and more control over individual submixes, the PreSonus HP60 is a fantastic option. But to get the most out of it you would need to be using a larger interface, something like the PreSonus FireStudio Project. The FireStudio along with the HP60 would expand the potential of your studio and give you a lot more options with your recording.

Style of Headphones

To begin with, if you’re looking for good headphones to use in the studio, I’d recommend a closed-back pair. They let you use higher volume levels without risking spillage into the recordingmicrophones, which is especially important when recording vocals as the headphones will be close to the mic.

When it comes to choosing a closed-back pair, I’ve had excellent results with the Sennheiser HD 280 PRO headphones. They come very highly recommended for using in your home studio.

Headphone Mix with a Mixing Board

To create a headphone monitor mix, you use an aux send on each input channel on your mixing board. The send level on each aux send acts as the volume level of the track going to the headphones. You can adjust these volumes by talking to the musician or vocalist to see what they want in their mix.

Each of the aux sends being used should be set to pre-fade – this means that moving the main channel fader won’t affect the level being sent down the aux send. You only want the aux send faders to affect the volume level of each instrument or vocal in the monitor mix.

If pre-fade isn’t selected, the aux send is automatically set to post-fade – which means that if the main channel fader is moved, the level of the aux send is also affected. This isn’t what you want.

Mixer

Monitor Mix Tips

There a few other important things to remember when thinking about a headphone mix.

  • When recording a new track, mute the channel that you are recording to, so the musician doesn’t hear a copy of what they’re playing bouncing back to them from the computer.
  • It’s common to find that most of these mixes will have the kick drum, snare drum, and bass levels quite high. It helps to keep the rhythm up-front and in focus when a new track is being recorded. Instruments like guitars or keyboards are usually slightly lower in the mix, but are still important for staying in tune and in key with the song.
  • A mix for a vocalist usually requires a little reverb or maybe a little delay on the vocal track that’s being recorded, as it creates a slightly more natural sound compared to a completely dry signal that would otherwise be sent to the vocalist’s headphones. It can help them to sing in tune with the rest of the track.

Headphone Mixer Software

Final Thoughts

Creating a headphone mix in your DAW (or on your desk) is pretty easy once you know how to do it. If you have the option to create these separate submixes, then they’re very useful to use if you need to record one or two musicians for one of your productions.

Headphone Mixer Multiple Inputs Functions

Even if you find that you don’t need to create a headphone monitor mix in your studio, I still think it’s a great skill and technique to have – you never know when you’ll need to use it.

Headphone Input Not Working

Related posts:





Coments are closed