Hydrovane Hv22 Manual

Posted on  by 



Again, these Hydrovane compressor problems in GA could be caused by dirty filters and airways, causing the pressure buildup to slow. It may also be possible that parts have started to loosen and they need to be tightened. The air compressor stops unexpectedly. Hydrovane HV 11 - 22 series is enclosed for quiet operation, and with a small footprint and low noise levels, these compressors can be conveniently located at the point of use. Sounds like a good conversation Rotary vane with quiet enclosure. Parts & Equipment. We handle all major brands of air compressors, vacuum pumps and accessories. From industrial and contractor applications to the garage enthusiast, we'll help find the right system to meet your needs and keep everything running in top condition.

John and Will are pleased to provide a Hydrovane proposal specific to your boat.
Please see Contact Us and provide John with the requested details.
The pricing for smaller Parts is found under the Technical tab.

Hydrovane Hv22 Manual

Complete package

Complete HYDROVANE VXA2D system includes:

Hydrovane Hv22 Manual
  1. DRIVE UNIT VXA2
  2. VANE – Standard, Stubby, or Extendable ‘XT’
  3. RUDDER
  4. SHAFT ASSEMBLY – Size required will be advised
  5. TWO BRACKETS – Brackets required will be advised
    • First Bracket: ‘‘H’ – hinged (always one ‘H’)
    • Second Bracket:
      • ‘H’ – hinged
      • ‘E’ – elbow – single strut
      • ‘A’ – double strut

Emergency Steering system only (for racers):

  1. RUDDER
  2. SHAFT ASSEMBLY – same as above
  3. TWO BRACKETS – same as above
  4. TILLER ADAPTER

PRICES Feb 15 2020

Before Shipping and VAT

VXA1 – no remote course setting – reduce Drive Unit prices by £220; €268; US$308; CAD$407

Component / CurrencyGBP £EURO €USD $CAD $
Drive Unit VXA21,9162,3372,6823,544
Extended Heading Tube (if required)100122140185
Rudder7879601,1021,456
Vane - Standard/Stubby281343393520
Vane - XT 'Extendable'5446647621,006
Shaft
'S'464566649858
'M'515628721953
'L'5997308381,107
'X'6748239441,247
'X+5'7068619881,306
'X+10'7439071,0411,375
'X+20'8089861,1321,495
Brackets
'H' - Hinged338412473625
'E' - Single Strut416508583770
'A' - Double Strut1,0431,2721,4601,929
Tiller Assembly (alone)296362415548

Changing boats?

Bring your Hydrovane with you

Lucky you! Let us know the details and we can advise the fit or any adaptations to consider for bringing your Hydrovane from one boat to the next.

The most time consuming part of the installation is planning and fitting the bracket flanges to the transom. You will use backing plates, sometimes mounting pads, and a lot of sealant/adhesive. Rather than undo this hard work, why not leave those bracket flanges in place? A great selling feature for prospective buyers, and no holes for you to fill.

We see this happening more and more often, and are pleased to offer you 50% off the required transom flange castings (P100, 106 or 111) to re-install the unit on your new boat.

Used Hydrovanes

Consider the necessary costs

We are happy to provide advice on older units. If you find one you are interested in, please contact Will or John.

Too often we provide the bad news of the cost of necessary segments that can result in total payments nearing the cost of a new unit, but without desirable features. In looking for a used unit it is important that you find both:

  • A current model
  • Has the appropriate shaft and brackets to be installed on your boat

Many purchasers of used units find that if they don’t get the correct configuration, the cost to make the unit suitable to their boat is close to or even more than cost of a new unit.

When calculating discounts for older units it is wise to know what you may need and/or what you may be missing.

Hv22
  • A new Shaft Assembly
    • Is the shaft the right size for your boat?
    • Is the shaft strong enough? Until 2002, we did provide a smaller diameter shaft, 1 1/8” (28.575mm) for small boats (up to 15,000 lbs). If the 1 1/8in shaft were to end up on a larger boat than was intended, it will bend.
    • All new shafts (since January 2009) are not only the larger 1 ¼” diameter, but made of ‘Super Duplex’ stainless steel – much harder and a remarkable 3 times stronger than the previous ‘316’ stainless 1 ¼” shafts.
  • A new Rudder – Today’s rudder MUST be supported by today’s Super Duplex shaft (2009 or newer), and the mid-bearing
  • Different Brackets – Are they the correct brackets for your boat?
  • Parts Unavailable – We only produce parts for the current model – since 1986
  • Performance on heavy displacement or fast boats – on older units (even VXA models) you may be missing many of the performance-enhancing features that have come about in recent years.
  • Today’s Drive unit includes:
    • Better balanced weights – properly balances the vane for improved light air performance
    • Better Bobbin Con Rod assembly – far stronger and tighter movement
    • Tighter Drive Sleeve
    • New Remote Course Setting, Worm & Worm Wheel
    • Improved Tiller – less prone to come loose or break
    • Overall improved motion:
      1. The Axis Disc has been altered to provide a bit more action
      2. The ‘drive train’ has been tightened up with the Con Rod/Bobbin connection and better Drive Sleeve
  • ‘Antique’ models are missing many key features

Visit the ‘Parts’ page for further information.

You are here: HomeProduct CatalogueRotary Vane hydrovane HV04-HV22

Max. Pressure710
Max. FAD [m³/min]0.660.54
Motor Power [kW (hp)]4.0
Motor Speed [rpm]1450
Oil Capacity [l]3.0
Air Outlet [Rp]0.75
Noise Level [dB(A)]66
Weight [kg]181
Max. Pressure710
Max. FAD [m³/min]0.90.72
Motor Power [kW (hp)]5.5
Motor Speed [rpm]1450
Oil Capacity [l]3.0
Air Outlet [Rp]0.75
Noise Level [dB(A)]66
Weight [kg]186

Hydrovane Hv22 Manual Transmission

Max. Pressure710
Max. FAD [m³/min]1.261.02
Motor Power [kW (hp)]7.5
Motor Speed [rpm]1450
Oil Capacity [l]3.0
Air Outlet [Rp]0.75
Noise Level [dB(A)]67
Weight [kg]197
Max. Pressure810
Max. FAD [m³/min]1.741.50
Motor Power [kW (hp)]11.0
Motor Speed [rpm]1450
Oil Capacity [l]7.0
Air Outlet [Rp]0.75
Noise Level [dB(A)]69
Weight [kg]384
Max. Pressure810
Max. FAD [m³/min]2.281.98
Motor Power [kW (hp)]15.0
Motor Speed [rpm]1450
Oil Capacity [l]7.0
Air Outlet [Rp]0.75
Noise Level [dB(A)]70
Weight [kg]397
Max. Pressure810
Max. FAD [m³/min]2.942.55
Motor Power [kW (hp)]18.0
Motor Speed [rpm]1450
Oil Capacity [l]7.5
Air Outlet [Rp]1.0
Noise Level [dB(A)]70
Weight [kg]481
Max. Pressure810
Max. FAD [m³/min]3.603.12
Motor Power [kW (hp)]22.0
Motor Speed [rpm]1450
Oil Capacity [l]7.5
Air Outlet [Rp]1.0
Noise Level [dB(A)]71
Weight [kg]494

Maintenance Service

When things go wrong you can rely on our fast, professional maintenance service

Hydrovane Hv22 Manual Pdf

Pdf

Short / Long Term Hire

Speak to our friendly, knowledgeable staff who will be only to happy to help

Need A Part?

We carry a large stock of parts which are available for immediate dispatch

Latest News
From BellAir

Hydrovane Hv22 Manual Pdf

10/01/2014

Hydrovane

Hydrovane Hv22 Manual Transmission

When an International Food Processing Company needed to make a review of their existing equipment wi…

Hydrovane Compressor Service

10/01/2014

Hydrovane Hv22 Manual Diagram

BellAir Compressors officially the No.1 Distributor of CompAir in the North of England BellAir were…





Coments are closed