Toyota Techstream With Crack

Posted on  by 



Here, you can download Techstream v13 software for free, including

Oct 10, 2017 The latest Toyota Techstream v12.10.019 software is verified to work 100% with MINI VCIcable, Xhorse MVCI, VXDIAG VCX NANO for Toyota OEM diagnostics tool, Toyota OTC2 OEM diagnostics tool. Techstream Lite allows Techstream diagnostic software to run on your PC (see minimum PC requirements) to service Toyota, Scion, and Lexus vehicles. Nov 27, 2019 5.Toyota Techstream 14.10.028 requires to register. Click on “Cancel” (no need key but easily crack) 6.Click on “Setup” and click on “VIM select”, then select “Xhorse MVCI”. 7.Exit Techstream to crack Techstream 14.10.028. 8.The way to crack Techstream 14.10.028: Right click on “Techstream” on the desktop, select.

the late version Techstream v13.20.017

and the tested version Techstream 13.00.022 (crack)

Techstream 13.20.017 download free:

Activation: NOT activated! But Techstream activation help is available from http://mhhauto.com/Thread-TOYOTA-Techstream-V13-20-017-08-2018-Activation BIG THANKS to Autokent

Key

Techstream 13.00.022 download:

Activation: It’s CRACK; NO need activation yourself!

Tested 100% with VXDIAG VCX Nano Toyota

Toyota Techstream 13.00.022 released notes:

Techstream 13.00.022 New Features

Starter Exchange Information Reset

Description:
Functionality added to clear the Stop & Start ECU starter operation counter.

Applicable Models/Systems:
2018 Highlander – Stop & Start System

System Path:
Stop & Start ECU / Utility / Starter Exchange

ECU Exchange

Description:
This utility is used to write data from the previous (replaced) ECU to the new replacement Stop & Start ECU.

Applicable Models/Systems:
2018 Highlander – Stop & Start System

System Path:
Stop & Start ECU / Utility / ECU Exchange

Reset Air Conditioner Information

Description:
This utility is used to reset the Stop & Start ECUs Air Conditioning status information. This information indicates whether the vehicle is equipped with an Air Conditioning ECU or not.

Applicable Models/Systems:
2018 Highlander – Stop & Start System

System Path:
Stop & Start ECU / Utility / Reset A/C Information

Deceleration Sensor Zero Point Calibration

Description:
This utility is used to perform the zero point calibration of the deceleration sensor for the Stop & Start system.

Applicable Models/Systems:
2018 Highlander – Stop & Start System

System Path:
Stop & Start ECU / Utility / Deceleration Sensor Zero Point Calibration

Deceleration Sensor Zero Point Clear

Description:
This utility is used to clear the zero point value for the deceleration sensor of the Stop & Start system.

Applicable Models/Systems:
2018 Highlander – Stop & Start System

System Path:
Stop & Start ECU / Utility / Deceleration Sensor Zero Point Clear

Integrated Current Value Initialization

Description:
This utility is used to initialize the Integrated Current Value for the Stop & Start system.

Applicable Models/Systems:
2018 Highlander – Stop & Start System

System Path:
Stop & Start ECU / Utility / Integrated Current Value Initialization

2018 and Earlier Model Years

  • All Models are currently supported

2019 Vehicle Coverage

’19MY Lexus’19MY Toyota
GS F86
NX300Avalon
NX300hC-HR
RC FYaris


Partial Support

’19MY Lexus’19MY Toyota
ES300hAvalon HV
ES350Corolla
Hilux
Prius C

Toyota Techstream Full Crack


Enhancements

CUW “Now Processing”

Description:
Added term “Now Processing” during CUW pre/post processing during reprogramming.

Applicable Models/Systems:
Calibration Update Wizard

System Path:
CUW

ECU Data Read/Write Functionality

Description:
Function added to enable read/write of old ECU data to new ECU.

Applicable Models/Systems:
Multiple ECU’s

System Path:
Chassis System / Utility

More Toyota diagnostic tool: http://www.cardiagtool.co.uk/producttags/toyota-diagnostic-tool/

Who Views This Article Also Viewed:

Techstream latest software crack

Rob Cowell

Well-Known Member

Toyota Techstream With Crack Camtasia

Just a quick note here because I couldn't find Windows 10 instructions on here.
I have a Mini-VCI J2534 cable which worked happily with my Techstream 10 install on 64 bit Windows 7, after some faffing. Anyway, had to give that laptop back last month when I left the job I'd acquired it from.
Windows 10 has a few more challenges. You need at least Techstream 12 (you could hack about with the registry to get Techstream 10 to work, nit don't waste your time). And you need to get Windows 10 to load 64 bit drivers for the cable. Windows 10 really doesn't want to let you load old, unsigned drivers. You can do it, but it'll make it hard for you.
So a bit of googling and a bit of trial and error and these steps seem to work.
http://blog.obdii365.com/2017/12/03/toyota-techstream-12-30-017-download-and-install/
Follow the steps under : Techstream install Windows 10.
Step 2. You want to run this from the cmd prompt as the admin user. (type 'cmd' in the Type here to search box in the bottom left of your screen)
Step 4. Copy all of the contents of the file in the link to notepad (dont copy and paste from the steps, there are extra spaces in there), and save as filename.reg
You then import that file using Regisitry Editor (type 'registry' in the Type here to search box). Select the import option from the File menu (top of the screen).
Some instructions suggest running a firmware update tool to confirm the cable install has worked; but the tool doesn't work in Windows 10. Don't waste your time like I did!
Step 7. You can get Techstream 12 from here : https://mega.nz/#!9NBllR4R!v1hY8XHTcT-RBJfQypQ5zIDLypBDJ12LHy6zDqdNOFA I did virus check this, but .. at your own risk. To extract this file you need to copy it to the desktop then open it with a zip program, such as Winzip. You may need to download that from somewhere.
Check the instructions.txt in the unzipped files. Theres a few simple steps to complete the install.
All working fine now. Just got to figure out how to get my copy of the workshop manual to fire up now. It doesn't seem to like new versions of Internet Explorer.




Coments are closed